IATF 16949 Sanctioned Interpretation 19 — August 2020 update

Archive from 2020. Editions, transition dates, figures and lists reflect the original article. For current implementation, check the documents presently in force.

How SIs are used

The first edition of IATF 16949 was published in October 2016 and became effective on 1 January 2017. The following Sanctioned Interpretations were determined and approved by IATF. Unless otherwise specified, they apply upon publication.

Revised text is shown in blue in the source document.

Sanctioned Interpretations explain a rule or requirement and may become the basis for identifying nonconformities during an IATF 16949 certification audit.

Publication and effective dates

• SIs 1–9: issued in October 2017, effective October 2017.
• SIs 10–11: issued in April 2018, effective June 2018.
• SI 8: revised and reissued in June 2018, effective July 2018.
• SI 10: revised and reissued in June 2018, effective July 2018.
• SIs 12–13: issued in June 2018, effective July 2018.
• SIs 14–15: issued in November 2018, effective January 2019.
• SIs 16–18: issued in October 2019, effective January 2020.
• SI 4: revised and reissued in August 2020, effective September 2020.
• SI 19: issued in August 2020, effective October 2020.

ITVC Global presents the August 2020 IATF 16949 Sanctioned Interpretations update, including SI 19.

Download the document

Download the SIs using this link: IATF-16949-SIs-Aug-2020

Consulting and training team

• Consultant and trainer Pham Xuan Canh and ITVC Global’s consulting team.